Product information

About Industrial floors

APPLICATION

Distribution centers, mainly with narrow aisles, and/or high-bay warehouses with induction-guided trucks.

GENERAL CHARACTERISTICS
The VB Exa® Superflat Floor is designed for maximum functionality and minimal maintenance. Joint-free floors inherently suffer from crazing and shrinkage cracks. However, these imperfections are acceptable, as they do not adversely affect a floor’s functionality. The best results are obtained when Van Berlo’s installation instructions are followed.

NORMAL MAINTENANCE
This VB Exa® Supeflat Floor needs minimal maintenance, partly thanks to the use of sufficient reinforcement and the avoidance of joints. Repairs of imperfections are only necessary if these hinder normal use of the floor, and are part of its normal maintenance.

• technical specifications
  Design:

  Van Berlo Engineering

  Flatness according to:

  DIN15.185, VDMA, WTCB (1), TR34 (1) NEN2747 (1)

  Reinforcement:

  B500A reinforcement steel

  Load:

  Compliant with schedule of requirements

  Standardization:

  NEN2743, WTCB TV122

  Finish:

  Monolithic
  

  Engineering:

  The floor structure is calculated on the basis of future loads in combination with the local subsurface and other user requirements.

  Flatness measurement:

  Full continuous measurement by independent measurement agency.
• guarantee

  According to Van Berlo’s general guarantee conditions.

• optional
  Mini Vibro Piles:

  The concrete floor is built on Mini Vibro Piles. This economical and fast pile system is ideally suited for the foundations of industrial floors on softer substrates.

  Underfloor heating:

  The concrete floor is provided with underfloor heating pipes.

  Parallelism:

  FEM 9831

  Surface sealing:

  Concrete sealing for a dust-free and maintenance-friendly floor, with increased wear resistance.

  Insured guarantee:

  Various types of guarantees can be provided, including an optional 10-year guarantee provided by an external insurer.

  Maintenance contract:

  Van Berlo carries out inspections, draws up reports, and makes recommendations. Maintenance work can then be carried out on a preventive or other basis following inspection.